Schedule Service

Backflow Device Installation And Prevention

Truck and people working with pipes

Water acts differently in Jacksonville, Florida, and other areas of the Sunshine State. Because these areas are surrounded by bodies of water, situations occur that could contaminate the water systems. This is why backflow device installation is necessary.

What Is a Backflow Device?

A backflow device also called a backflow prevention tool, is installed in a residence’s water pipes. Its job is to allow water to flow in the direction of your home instead of the other way around. By using this method, properties won’t face the risk of having contaminated drinking water.

How Does Backflow Occur?

There are circumstances where the pressure to move water to your home changes. When this occurs, the flow moves backward. This takes place when there’s a break in the main water line. The pressure also changes when nearby hydrants are opened for use.

In turn, contaminants seep into the main supply line. These contaminants could be pool chlorine, soap from sinks and dishwashers, or fertilizers. Backflow is not limited to a particular home but to the whole area. This is why backflow prevention is critical.

Backflow Device Regulations

Backflow device installation isn’t necessarily available across the entire state. In most cases, it’s required if you have an irrigation system or well on your property. Where the public water system features preventive measures to minimize backflow, this might not be the case when a home or other residence is off the grid.

Furthermore, newer homes in Jacksonville and other areas could have backflow prevention equipment already installed. Should you be in the market for a house, make sure this is addressed with the sellers or their realtor. If there’s a history of backflow issues, then it’s a good idea to ask for a device installation before you close.

Where is it Installed?

Normally, the backflow device is installed at the main pipes that go into the water meter. When it senses a change in pressure, the equipment secures your property from contamination by locking down the pipes. Though you may lose drinking water for a time, you don’t have to spend money while flushing your system with contaminants.

What Does it Cost?

The cost of a backflow device is a few hundred dollars. Extra fees are applied for installation by a plumber. Since this task requires subject matter expertise, it’s highly recommended that you hire a professional for this task.

A backflow device provides a tremendous return on investment. It prevents contaminants from entering your drinking water when the pressure changes in the main pipes. For a few hundred dollars, you’ll be guaranteed fresh water at all times in Jacksonville, Florida. In the end, it’s important for the safety of you and your family, so call (904) 567-3775 today to get help from the most trusted professionals in the town!

Related Posts
  • Things To Look Out For To Make Sure Systems Are Running Smoothly Read More
  • Time To Review Your Plumbing And Septic Systems Read More
  • How To Qualify A Jacksonville Plumbing Contractor Read More